The PERRIN EBCS Pro Series 3-Port Electronic Boost Control Solenoid is designed to control today's high performance wastegates with it's ultra fast response and bomb proof design. The PERRIN EBCS was the first and original aftermarket boost control solenoid, and now we have taken it one step further with the EBCS Pro!
No CARB Legal: This Product Cannot Be Ship To California!
Aluminum & Nickel Plated Brass Construction
Main valve body of the EBCS pro is made of corrosion resistant nickel plated brass, with proper seals to withstand the temps and oils see in a boost control system. The body of the EBCS Pro is made of 6061 aluminum then anodized to ensure it stays looking good forever. These things allow the EBCS Pro to easily survive under hood temps.
Direct Plug & Play With OEM And Stand Alone ECUs
Our OEM type male connector is specific to all Subaru and Mitsubishi applications. Includes additional connectors to allow universal applications.
Ultra High Performance Custom Cartridge
The custom made solenoid coil and valve are made specific to PERRIN specs. This allows the valve to operate almost 2 times faster than other designs, flow almost 50% more air, and work with OEM ECUs without causing check engine lights. To fully utilize the EBCS Pro, an ECU recalibration is NEEDED to ensure no over boosting occurs. Contact our tech department for further info.
Nickel Plated Connectors
High quality nickel plated brass fittings resist corrosion and will not break. For race professionals the EBCS will also accept AN fittings for the best connection possible.
Includes Everything You Need
Every EBCS Pro comes with 6ft of vacuum hose so you can route and mount your EBCS anywhere under the hood. The EBCS kit includes additional hardware for all applications.
The PERRIN EBCS Pro comes with a Laser cut stainless steel mounting bracket which will never corrode and provides a solid mounting surface. Brackets are specifically designed for use with each year of WRX
- Short Piston Stroke
- Balance piston, immune to different boost levels
- Very few parts
- Solenoid isolated from contaminated air
- Extremely long life
- Operates in vacuum up to 120 psi
- Tuning Required
- (1) PERRIN EBCS Pro assembly
- (1) 5/32" ID Vacuum hose
- (1) Bracket for washer bottle
- (2) 5/32" Nickel barb 1/8NPT, 90 degrees
- (1) 5/32" Nickel barb 1/8NPT, straight
- (1) M8 Button head screw
- (2) M8 Flat washers
- (1) 3/16"-3/16" Plastic connector
- (1) M5 Short arm hex key
- (4) Zip ties
- Warranty & Instructions
California Residents, Proposition 65 Warning