Injector Dynamics ID1300X Top Feed Fuel Injectors for 11+ Ford Mustang GT 5.0L
This collaboration has given ID the ability to design a high flow injector with characteristics specific to the needs the high-performance tuner. The ID1300x was designed with alternative fuels in mind, and is the only performance injector available with all stainless internals. It is compatible with all known fuels, and will stand up to the corrosive nature of alcohol better than any injector on the market.
While the ID1300x was designed with an eye towards ethanol fueled engines, Injector Dynamics has accounted for the occasional need to convert back to gasoline. The ID1300x has a minimum fuel mass compatible with gasoline use, and will provide exceptional idle and cruise behavior under these conditions.
Injector Dynamics is an Authorized Technical Partner of Bosch Motorsport North America.
•Injector Dynamics fuel injectors are the result of batch testing large quantities of specially modified fuel injectors, and then carefully matching them to within 1%, in sets based on their dynamic flow across the pulsewidth range. The result is vastly superior cylinder to cylinder consistency, even at very low pulsewidths.
•The ID1300x will maintain strict linearity at flow rates that will satisfy idle and cruise requirements for engines.
•Compatible with all known fuel types.
•Sold in sets of four (4) and require ECU tuning.
•12-month limited warranty
Nominal Flow Rate – 1340cc/min @ 3.0 Bar (43.5 psi) Using Iso Octane at 52 Degrees C (125 Degrees F)
Maximum Differential Fuel Pressure – 6.0 Bar (87.0 psi)
Fuel Compatibility – Compatible With All Known Fuels – (Designed Specifically for Alternative Fuels)
Electrical Connector – USCAR