Product Description
Perrin Front Mount Intercooler Kit (Black Core/Black Pipes) For 15-17 Subaru STI
Details:
PERRIN Front Mount Intercooler Kits are ideal for those who want to get the most out of their turbocharged Subaru. Add power and a bold new look all in one with a PERRIN FMIC!
NOTE: Not CARB Legal - Cannot ship to California.
Proven Power: This dyno graph was pulled from the testing we did comparing the OEM Top Mounted Intercooler and the PERRIN Front Mount Intercooler. We had the car all set so we could do these tests back to back with only a couple minutes between runs. The test compares the small stock TMIC to the huge PERRIN FMIC, and you can see there is 10-18WHP and 10-15ft-lbs of torque gain! Part of the reason for the gain is that the intercooler is less restrictive and also cools the charge air better. In this case, the PERRIN FMIC knocked off about 40F from the intake charge temperatures!
Intercooler Support Beams: Perrin Intercooler Support Beam are contructed from boxed steel and are powder coated black. Competitors use inexpensibe aluminum bumper beam which save a little weight but can be easily destroyed in a colision.
Intercooler Core: The most important part of any intercooler system is the core. The core cools the charged air on the way to the engine. The factory Subaru tube and fin intercooler was designed to be easy to manufacture, but is not good for performance.
Our testing has shown the optimum core design is the 3/8” bar and plate style that has a 3/8” charge air and ambient air path, instead of the common 1/4” size. The PERRIN bar and plate core design is much more durable than tube and fin with the ability to withstand rocks and other debris, which may enter the scoop. The PERRIN intercooler core is 28” long x 9.25” tall x 3.5” deep with a volume of 906.5 cu-in. giving the PERRIN Intercooler the best overall design for cooling and pressure drop!
Finish: Every PERRIN intercooler is powder coated to further protect your intercooler from the elements making it look awesome for years to come. Our intercoolers come in two finish options, a bright silver or stealth black powder coat.
Cast End Tanks: The PERRIN designed end tanks control for near perfect dispersal of hot air across the intercooler core. By eliminating any 90º corners adding a smooth, and gradual taper from top to bottom turbulence is eliminated. Each end tank incorporates an innovative mounting tab to secure the core to the mounting beam.
Boost Tubes: PERRIN boost tubes are CNC mandrel bent from aluminum tubing for better weight reduction. Every boost tube has an over sized beaded end to ensure the hose clamps and couplers stay connected and sealed! We choose to take the smoothest shortest path to get air to and from the intercooler.
Right off the turbo a smooth offset coupler carries the hot side air charge to a perfectly matched 2.25” boost tube. We chose 2.25" tubing for a smoother, cleaner, obstruction free routing while still being large enough to flow more WHP than most turbos can put out. The air charge then is routed through the engine bay next to the battery, and down behind the radiator to the intercooler. The cold side boost tubes are mounted as high as possible in the engine compartment to clear all turbo and intake combinations as it travels to the throttle body through the engine bay.
Upgraded Washer Fluid Tank: The PERRIN Front Mount Intercooler kit includes a PERRIN Washer Fluid Tank. How the boost tubes are routed through to the intercooler, the OEM tank conflicts with the space required. The PERRIN Washer Fluid Tank is protected from the elements by a black powder coating finish. It looks great and makes the silk screened logo pop.
Coolant Reservoir: The PERRIN Front Mount Intercooler kit includes a PERRIN Coolant Overflow Tank. It adds clearance for better boost tube routing, holds more coolant than previous designs and uses the OEM tank cap for a great seal! The PERRIN Coolant Overflow Tank is protected from the elements by a black texture powder coating.
Pressure Testing: PERRIN is one of the only intercooler manufactures who pressure tests every intercooler. We pressurize every intercooler to 50 psi. on our special jigs. This ensures you never get a core with a leak! Even the slightest leak can cause your vehicle to lose power, literally bleeding turbo boost pressure out the intercooler.
Weight: The PERRIN Front Mount Intercooler kit only adds 9lbs of weight! If you take all the factory pieces you remove and compare them to the PERRIN parts you are installing, you will find you only added 9lbs!
Logo Stencils: Included with our front mount intercooler is a free PERRIN logged intercooler stencil. Use the stencil to easily paint the PERRIN logo across the front of your intercooler. Simply peel, stick, paint, and remove.
Includes:
- (1) PERRIN Front Mount Intercooler Core with Bumper Beam
- (1) Set of PERRIN Boost Tubes
- (1) PERRIN Coolant Overflow Tank
- (1) Set of Clamps
- (1) Set of PERRIN Silicone Couplers
- (1) PERRIN License Plate Frame
- (1) PERRIN Intercooler Stencil
- All necessary installation hardware
- Worry-Free 5-Year Warranty
- Instructions
