Product Description
These cams are built to suite the high horsepower drag Subis. With a power range of 750-1000 WHP and a rev range of 4500-9500 rpms, you need some certain mods to utilize the true potential of the S3s. Built motor, with a built/ported head (clearance for lift), and a standalone engine management system. Upgraded valve springs are required; Beehive valve springs are recommended but not required.
Notes:
- Check Pictures for cam placement. Long nose= Left Side, short nose - Right Side.
- Due to the lobe size, head castings will need to be filled down slightly for clearance.
- Proper break in and running high zinc oil is a must on flat tappet engines.
- Must be installed by an experienced technician
- Requires upgraded valve springs
- Check AVCS advance during install-Must be done by experienced engine builder
| 7026S3 | ADV Duration | Duration @ 0.040" | Peak Lift | Center Line |
| Intake | 280° | 240° | 11.55mm | 130° |
| Exhaust | 280° | 241° | 11.60mm | 128° |
California Residents, Proposition 65 WARNING
