Product Description
What's feeding that massive 6.2L under your hood? If it's not an aFe Magnum Force Pro Dry S Cold Air Intake, you're leaving horsepower on the table. With 5% more flow than the factory intake, an hour of wrenching will deliver an additional +5 HP and +4 Lbs. x Ft. TQ.
No CARB Legal: This Product Cannot Be Ship To California!
Large Three Layer Performance Air Filter: Dual 4” Flange 360-degree radial flow air filters feature our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Their progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street use. Their inverted tops make for more filter surface area, resulting in longer service intervals.
Heat-Resistant Housing: The dual air filters are surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that minimizes warm engine air for maximum performance. It is precisely designed and manufactured to fit perfectly into the factory mounting location. The housing connects to the factory air inlets on each side of the vehicle to capture the coolest air available.
Dyno-Tuned Intake Tube: This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. The XLPE material is heat soak resistant and extremely durable.
Seals to the Trunk Cover: The seal trim installed on the housing edge seals to the plastic trunk cover to protect the air filters from unwanted warm engine air. This set up allows for more aggressive air intake noise while not sacrificing any performance.
Premium Hardware: Premium stainless-steel clamps and flexible silicone couplings are used for strength and durability while also providing the most secure installation available.
Fitment Note: This item will fit convertible models but the seal trim around the housing will not seal completely to the trunk cover. 58-10007R and 58-10007D is preferred for convertible models because the cover in those kits will completely seal the housing.
Features:
- Dyno-Proven Gains up to +5 HP & +4 Lbs. x Ft. TQ
- Outflows Factory Intake by 5%
- Measured Flow: 500 CFM @ 7" H2O
- Dyno-Tuned Intake Tube to Achieve Maximum Power Gains
- Dual 360-degree radial flow performance air filters
- Heat resistant housing that enclosed the dual air filter set up
- Housing seals to the trunk cover to protect air filters from unwanted engine heat
- Premium silicone couplings and hardware
Vehicle Applications:
- 2020-2025 Chevrolet Corvette C8 6.2L
California Residents, Proposition 65 WARNING
